10-630

Autolock

Standard slider used on jackets and/or open end (separating) zippers. Autolock sliders are manufactured with a small locking mechanism inside the body of the slider. This locking device keeps the slider from moving on the zipper until the pull tab releases the locking pin from its home position nestled between the zipper teeth.

Applications: Jackets or coats that would typically use a zipper in the front of the garment. Any other item that requires the slider to stay in place until the zipper is used.

Nonlock Long Pull

Large pull with generous hole at bottom of the pull.

Applications: Typically used on bags or items that would not require a locking slider. Suitable for any type of backpack or outdoor gear, tents, luggage or bags.

10-604
_5-638

Autolock Bell Pull

Same functionality as the standard autolock slider with a bell shaped pull. Generous hole in pull allows fabric or fob to be attached to pull for decoration or for easier accessibility of slider.

Applications: May be used on zippers for front of garments or purses or along the leg openings on coveralls.

Nonlock double Pull

Standard nonlocking body with two pulls.

Applications: Used on any application that requires access from both sides of the zipper such as tents or windows on fabric or vinyl auto tops.

10-622
slider-coil-nonlock-double-nickel

Nonlock Double Pull,
Nickle Finish

Standard nonlocking body with two pulls.

Applications: Used on any application that requires access from both sides of the zipper such as tents or windows on fabric or vinyl auto tops.

Nonlock Short Pull

Nonlock slider body with smaller pull and generous size hole.

Applications: Any application requiring a nonlock function slider but where a smaller pull is desired.

10-605
10-650

Autolock Ring Pull

Same functionality as the standard autolock slider, with a 1" inside diameter ring pull.

Applications: Perfect slider to use in applications where gloves are often worn or any other application where an easy-to-grab pull is desired.

TS-Pull autolock

Standard locking function as found in the autolock slider family. Stylish pull.

Applications: Used on zippers found on sweaters, light-weight garments and purses.

10-605
5-631

Autolock Long Pull

Standard autolock body with long, rounded pull. Generous size hole in pull allows easy attachment of fabric fob.

Applications: Jackets, casual wear or any apparel where a larger, easy to grab pull is desired.

Autolock-Flip

Autolocking slider body with one pull that "flips" around to the opposite side.

Applications:Typically used on reversible outerwear and removable liners in jackets.

5-621
_10_635E_Black

Autolock-Double-Pull

Standard locking function on both sides of the slider.

Applications:Standard slider used in the Marine Industry for boat top covers and other canvas work requiring accessibility from both sides of the zipper.

Autolock Nickel Finish

Standard slider used on jackets and/or open end (separating) zippers. Autolock sliders are manufactured with a small locking mechanism inside the body of the slider. This locking device keeps the slider from moving on the zipper until the pull tab releases the locking pin from its home position nestled between the zipper teeth.

Applications: Jackets or coats that would typically use a zipper in the front of the garment. Any other item that requires the slider to stay in place until the zipper is used.

_10_630N
_5-636

Flatlock Plastic Coated Pull, Oxidized Finish

Modified type of a locking slider with a narrower profile and a secure locking feature with a plastic coated pull.

Applications:Can be used on trousers or sleeves or any other application where a slim lockable slider is desired.

no.12 autolock

Standard slider used on open end (separating) zippers. Autolock sliders are manufactured with a small locking mechanism inside the body of the slider. This locking device keeps the slider from moving on the zipper until the pull tab releases the locking pin from its home position nestled between the zipper teeth. 

Applications: Any other item that requires the slider to stay in place until the zipper is used.

 

1030-E-1b
1030-S-1b

No.12 Stainless Steel Autolock

Constructed of 316 Stainless Steel. Standard slider used on open end (separating) zippers. Autolock sliders are manufactured with a small locking mechanism inside the body of the slider. This locking device keeps the slider from moving on the zipper until the pull tab releases the locking pin from its home position nestled between the zipper teeth.

Applications: Any other item that requires the slider to stay in place until the zipper is used.

No.12 Autolock Double Pull

Standard locking function on both sides of the slider

Applications: Standard slider used in the Marine Industry for boat top covers and other canvas work requiring accessibility from both sides of the zipper

1035_E-1b
1011-E-1b

no.12 Plastic Nonlock

Same as the nonlocking long pull, but entire slider (body and pull) is made from plastic.

Applications: Any use that may require a non-metallic zipper

no.12 Nonlock double pull

Standard nonlocking body with two large pulls.

Applications: Used on any application that requires access from both sides of the zipper, such as tents outdoor building structures, and boat top covers.

1022-E-1b
1022-S-1b

no.12 stainless steel double pull

Constructed of 316 Stainless Steel. Standard nonlocking body with two large pulls.

Applications: Used on any application that requires access from both sides of the zipper, such as tents outdoor building structures, and boat top covers.

No.12 STAINLESS STEEL AUTOLOCK DOUBLE PULL

Constructed of 316 Stainless Steel. Standard locking function on both sides of the slider. 

Applications: Standard slider used in the Marine Industry for boat top covers and other canvas work requiring accessibility from both sides of the zipper

1035-S-1b
 
1543-E-1b

No.15 Nonlock Single Pull

Large pull handle attached to slider body with a double braided 16 carrier polyester cord. Pull handle is large enough to be easily grasped with a gloved hand. Overall length of slider and pull is approximately 4 inches. Slider to be used on BIGZIP zipper only.

Applications: For use on applications requiring a robust zipper such as large tents, car ports, and outdoor building structures.

no.15 STAINLESS STEEL NONLOCK SINGLE PULL

Slider body constructed of 316 Stainless Steel. Large pull handle attached to slider body with a double braided 16 carrier polyester cord. Pull handle is large enough to be easily grasped with a gloved hand. Overall length of slider and pull is approximately 4 inches. Slider to be used on BIGZIP zipper only.

Applications: For use on applications requiring a robust zipper such as large tents, car ports, and outdoor building structures.

1543-S-1b
1544-E-1b

no.15 Nonlock Double Pull

Oversized heavy-duty plastic pulls are attached to the slider body with strong double braided 16 carrier polyester cord. Pull handles are large enough to be easily grasped with a gloved hand. Overall length of slider and pull is approximately 4 inches. Slider to be used on BIGZIP zipper only.

Applications: Used on applications that requires access from both sides of the zipper, such as on large tents, car ports, and outdoor building structures.

NO.15 STAINLESS STEEL NONLOCK DOUBLE PULL

Slider body constructed of 316 Stainless Steel. Oversized heavy-duty plastic pulls are attached to the slider body with strong double braided 16 carrier polyester cord. Pull handles are large enough to be easily grasped with a gloved hand. Overall length of slider and pull is approximately 4 inches. Slider to be used on BIGZIP zipper only.

Applications: Used on applications that requires access from both sides of the zipper, such as on large tents, car ports, and outdoor building structures.

1544-S-1b